Shower & Tub Installation Palm Beach County, FL

Professional shower and tub installation services in Palm Beach County with expert waterproofing and code compliance.

Local Shower & Tub Installation Expertise

In Palm Beach County, proper shower and tub installation prevents costly water damage and hidden leaks. We handle everything from drain placement to waterproofing, ensuring your bathroom is built to last in Florida's humid climate.

Shower & tub installation in Palm Beach County requires precision, local code knowledge, and attention to the details contractors often miss.

How We Work

Our process focuses on getting the foundation right: proper slopes, secure connections, and complete waterproofing before any finishes go in.

Assessment & Site Preparation

We start by inspecting the existing bathroom structure, plumbing rough-in, and drainage. This is where many problems hide—old pipe work, settlement issues, or moisture already present in the walls.

In older homes throughout Palm Beach County, we often find galvanized pipes or improper slopes. We address these before installation to prevent failures later.

Rough-In & Plumbing Setup

Water supply lines and drains are positioned with precise measurements and proper pitch. Drain slope is critical—even a quarter-inch difference causes pooling and mold risk.

All connections are tested for leaks before walls close up. We ensure vent stacks and traps meet Florida plumbing code, preventing gurgling, slow drains, and sewer gas.

Tub or Shower Pan Installation

The fixture is set level on a proper mortar bed. Leveling is non-negotiable—even slight tilts lead to water pooling, drainage problems, and structural decay underneath.

We seal all connections, apply waterproofing membranes, and use high-quality caulk. This is where professional prep separates clean bathrooms from water-damaged ones.

Measure & Plan

We verify exact dimensions, check existing plumbing alignment, and identify any code violations or hidden damage before breaking ground.

Demo & Prep

Old fixtures are removed safely, the area is leveled and cleaned, and any water damage or soft framing is repaired before new installation begins.

Rough Plumbing

Supply and drain lines are run with correct pitch. All connections are pressure-tested and inspected before moving to the next phase.

Tub/Shower Set

Fixture is bedded level, waterproofing membranes are applied, and all seals are inspected before surround or tile work begins.

Surround & Finish

Walls are finished with tile, acrylic, or fiberglass. All caulk and grout are sealed with premium products to protect against Florida's humidity.

Final Test & Walkthrough

We run water through the system, check all fixtures, and verify drainage. You'll know exactly how your new shower or tub performs before we're done.

You'll always know what's happening next—and when.

Our Services

We specialize in shower and tub work that holds up in Palm Beach County's climate.

Standard Tub Installation

We install alcove tubs in existing rough openings, replacing old fixtures or upgrading to new styles. Whirlpool, soaking, and standard models all get the same precision waterproofing treatment.

Common in Jupiter and West Palm Beach, we handle both slab and pier-and-beam foundations with proper support and drainage.

New alcove tub with secure surround in West Palm Beach home

Shower Installations

Walk-in showers, corner units, and tub-shower combos all require proper pan slope and waterproofing. We use commercial-grade materials to prevent the mold and water damage we see in older Palm Beach homes.

Whether you're updating a 1970s bathroom in Boynton Beach or building new in Lake Worth, we handle the plumbing rework and tile substrate correctly.

Custom shower with proper pan slope and waterproofing in Lake Worth

Tile Shower Enclosures

Custom tile showers demand precise waterproofing behind every tile. We install proper membranes, ensure correct grout spacing, and seal all joints to prevent leaks that hide for months.

In humid Florida climates like ours in Palm Beach County, poor tile work leads to mold and structural rot. We do it right the first time.

Custom tile shower with proper substrate and sealing in Jupiter

Fixture Upgrades & Trim

Valves, handles, showerheads, and trim kits are installed with attention to plumbing code and proper valve depth. Misaligned trim or leaking valves are avoidable with careful setup.

We ensure water temperature is balanced, pressure is consistent, and all handles and trim sit flush against your walls.

Why It Matters

Improper shower and tub installation is one of the leading causes of water damage and costly repairs.

Prevent Hidden Water Damage

Water seeping behind tub or shower walls goes unnoticed for months. By the time you spot soft drywall or musty odors, mold is already growing and framing is rotting underneath.

Poor caulk, missing waterproofing, and wrong sealants are the usual culprits. Fixing this damage after the fact costs far more than doing it right initially.

Florida's humidity makes waterproofing non-negotiable. Gaps in caulk or poor membranes fail fast in Palm Beach County.

Avoid Slow Drains & Mold

Pooling water in a tub or shower is a red flag. It means slope is wrong, the drain sits high, or there's a blockage in the rough plumbing. Water sits, algae grows, and mold thrives.

A professionally installed drainage system moves water fast. Proper slope, clean drains, and secure connections prevent the musty bathrooms we often see in older homes throughout Delray Beach and Boca Raton.

Meet Florida Code & Resale Value

DIY or sloppy work raises red flags during home inspections. Buyers demand code-compliant bathrooms with proper permits and waterproofing documentation.

Professional installation protects your investment and your home's market value. We pull permits, follow Florida plumbing code, and keep records you can show future buyers.

Serving Palm Beach County and Surrounding Areas

We serve homeowners and contractors throughout Palm Beach County with the same attention to waterproofing and code compliance.

From West Palm Beach's older tile bathrooms to Jupiter's newer homes, we understand the challenges of installing showers and tubs in Palm Beach County. Slab foundations, pier-and-beam structures, and humid air all demand proper technique.

Whether you're in Boynton Beach, Lake Worth, Delray Beach, Boca Raton, or elsewhere in the county, we bring the same expertise and commitment to getting your bathroom built to last.

Every Palm Beach County home faces moisture challenges. That's why we don't cut corners on waterproofing or code compliance.

Frequently Asked Questions

Common questions about shower and tub installation in Palm Beach County.

What causes water damage behind a shower or tub?

Poor waterproofing, missing membranes, failed caulk, or wrong sealant allow water through gaps in tile, grout, or fixtures. In Florida's humidity, these failures happen fast.

Why does my tub or shower drain slowly?

Incorrect drain slope, blocked vent stack, or debris in the waste line are typical causes. Installation errors—like the drain sitting too high—create permanent slow drainage.

Can you install a shower in an old bathroom with existing plumbing?

Yes, but we often find old pipes, poor slopes, or code violations that need fixing first. Covering up bad rough plumbing guarantees problems later.

What's the difference between acrylic and tile surrounds?

Acrylic surrounds are faster and lower-maintenance; tile looks custom and premium but requires precise waterproofing underneath. Both are durable when installed correctly.

Do you pull permits for shower and tub installation?

Yes. Permits ensure code compliance and code inspections catch problems before finishes go in. It protects your home and its resale value.

How do you prevent mold in a new shower?

Proper waterproofing, fast drainage, and quality sealants stop water from sitting or seeping. Good ventilation and caulk maintenance also help long-term.

What's the right way to install a shower or tub in Florida?

Professional shower and tub installation starts with correct rough plumbing: proper slope (at least a quarter-inch per foot), secure connections, and vent stacks that meet Florida plumbing code. Next comes waterproofing—quality membranes behind all tile and fixtures, premium caulk in every joint, and sealed substrate boards that block moisture. The fixture sits level on mortar, drains are pressure-tested, and all seams get final inspection before walls close up. Skip any of these steps, and water finds a way through.

Correct drain slope prevents pooling and slow drainage
Quality waterproofing blocks moisture from reaching framing
Level fixture installation ensures even wear and proper function
Code compliance protects your home and future resale

When done right, a new shower or tub lasts decades without leaks, mold, or structural damage.

DISCOVER WHAT OUR CUSTOMERS HAVE TO SAY ABOUT US

REVIEWS

proudly serving these areas

Palm Beach County, FL
North West Broward, FL
Martin County, FL
St Lucie County, FL

view all service areas